About
IMPORTANT UPDATE! customize your hands free headset
UPDATE! MmY BLUETOOTH CHARGES IN A LITTLE BOX CHARGER. When I glued on the rhinestones I forgot it has to fit into the box to charge. Oops! I had to remove the rhinestones I had glued to the top side then scrape off the glue. This left it kinda crappy looking. I used a emery board to buff off most of the glue then I used a sparkle nail polish to cover up my mistake. I was able to purchase 2 new Bluetooth headsets for less than $10.00 including shipping from EBay. I bought the universal kind so I could use them for my Samsung Reclaim. Pretty boring so I used nailpolish on one and glued rhinestones on the other.
You Will Need
-
Step 1First I bought the headsets. I made sure they were compatible with my phone model. They are universal headsets. Pretty boring and I do not like boring!
-
Step 2For the first headset I used different colors of nailpolish with the skinny brushes. I started with one color and painted on little lines in a spoke design. I just added different colors in the same pattern overlapping the colors. I then painted little white dots using the end of a round toothpick that I slightly sanded on the tip with an enery board. Flattening the end of the toothpick makes it easier to paint dots. Be careful not to cover the switches or the blinking light. I only painted on the top and not on the bottom where the metal contacts are.
-
Step 3On the second headset I used superglue and rhinestones. Again be careful not to glue over the switches or blinking light or contacts.
-
Step 4Be careful with the glue and use little dots for each rhinestone. I also glued rhinestones to the top. Please don't do this if you have to put it into a charging case. Next time I will try to make a straighter line of them.ﺕ
1
Stud Earrings »
Miraculous Ladybug Earrings
but you have made a smart great awesome change.like it very much, thank you for your tute and sharing like the face on it too( or isn't it a face?);-D