Magazine Picture Frame

  ✂︎

Favorite

Comment

List

       

Share

• Step 1

  first you take a piece of card board and cut a hole in the middle just big enough to see your desired picture.

• 

  Step 2

  then you grab your old magazine and cut a bunch of 3 inch strips.

• 

  Step 3

  you then grab your stick (i used a kabob stick) and start rolling your strip or magazine onto it. try to get it as tight as possible, but loose enough to be able to pull the stick out.

• 

  Step 4

  as your rolling, dab some glue to help keep the form.

• 

  Step 5

  gather all of your rolled magazines

• 

  Step 6

  then cut the ends so that they are nice and flat and straight

• 

  Step 7

  then place glue onto your cardboard and put your rolled magazine onto it.

• 

  Step 8

  then cut off the excess! you can certainly measure the rolled magazine, cut then glue, but this was easier for me. =)

• 

  Step 9

  then you just keep going until your done

• 

  Step 10

  then taadaahh!! just tape your fav picture to the back and you're set.
  you can add some string and hang it on your wall, or whatever you like =)

• 

  Step 11

  spray some clear top coat to seal it

Comments

Leave your comment