Heart Ears Headband

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  cut 2 pieces of paper
  shaped like a heart
  about 3" big

• 

  Step 2

  fold your scrap of
  fabric in half and pin down
  both hears
  then cut them out

• 

  Step 3

  by now you should have 4
  hearts
  fold 2 of the hearts
  in half and
  cout out a other heart in
  the center

• 

  Step 4

  now your going to have to
  get an other
  scrap piece
  and lay it over the heart
  the scrap piece
  has to be just a bit bigger
  than the small heart
  inside the heart

• 

  Step 5

  now lay
  a piece of fusible
  interfacing over the heart
  iron it on then cut out the
  extra

• 

  Step 6

  now get one of each heart turn
  them wrong sides out and pin them
  stitch all around the heart but leave
  enough space open to stuff it

• 

  Step 7

  turn the hearts inside
  out and then
  stuff the he heart
  with what you have
  and don't stitch it

• 

  Step 8

  ok so
  now your going to
  get your headband and wrap wire where
  the the hearts are going to go
  make sure you wrap it
  strong enough so it doesn't move
  (the wire will help the hearts stay in place ans stay up)

• 

  Step 9

  put the hearts inside the
  wire then stitch them tight
  and your done :)!!

Comments

Leave your comment