https://www.cutoutandkeep.net/projects/heart-ears-headband • Posted by BRENDA N.
cut 2 pieces of paper shaped like a heart about 3" big
fold your scrap of fabric in half and pin down both hears then cut them out
by now you should have 4 hearts fold 2 of the hearts in half and cout out a other heart in the center
now your going to have to get an other scrap piece and lay it over the heart the scrap piece has to be just a bit bigger than the small heart inside the heart
now lay a piece of fusible interfacing over the heart iron it on then cut out the extra
now get one of each heart turn them wrong sides out and pin them stitch all around the heart but leave enough space open to stuff it
turn the hearts inside out and then stuff the he heart with what you have and don't stitch it
ok so now your going to get your headband and wrap wire where the the hearts are going to go make sure you wrap it strong enough so it doesn't move (the wire will help the hearts stay in place ans stay up)
put the hearts inside the wire then stitch them tight and your done :)!!