Stump Work Flower N Leaf

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  use 2 pieces of materiel together in your hoop.

• 

  Step 2

  Take thin wire, if you can find it in the color of your yarn it really helps.

• 

  Step 3

  make a loop and cut and twist the bottom together

• 

  Step 4

  Tack your wire threw both pieces of your material with thin thread, just tack it not sew.

• 

  Step 5

  I used thick embroidery thread to see it good, you attach to your wire, by wrapping it around the stem first.Then do a blanket stitch all around the wire don't go threw the material, just go under the wire. All work is done under the wire and back up , never going threw the material.

• 

  Step 6

  go all around the wire with the blanket stitch and come back to the stem.

• 

  Step 7

  make cross stitches from one side of the wire to the other, always under the wire, but not into the material, Go across and then weave your thread
  from top to bottom, and back.

• 

  Step 8

  take off the hoop, and pull your 2 pieces of material apart this will break your tack threads, and your petal will come off the materiel,pull out or cut off any remaining tack thread.
  Make as many as you would like for your flower.

• 

  Step 9

  After putting double material in hoop
  use large eye needle to make hole for the wire stems, and pull thu to the back.Do this will all your petals.
  Turn over to the back and pull thru and twist wires and tack with thread.
  I made a leaf to.

• 

  Step 10

  push them all threw and run any thread
  thew the hole and after you tack it
  it will stay firm and you can add reg embroider to your piece to help the dimensional part to really stand out.

• 

  Step 11

  Finish up your embroider picture with lots fun stuff ..smile..

Comments

Leave your comment

Jet H. · Haarlem, North Holland, NL · 108 projects 2nd May 2011

this is really lovely those 3d flowers to make, awesome sooo pretty and smart methode!!!
love it, greate first tute!!!! thank you very much for all your effords and the sharing. i hope to try it out some day;-D

Reply