Puzzle Piece Wine Charms

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Pick your pieces from an old puzzle you have laying around. Mine was an old dice puzzle that no one could do and keep their sanity.

  Try to pick pieces that are different.

• 

  Step 2

  Paint each one with your base polish colour. Be sure to let them dry before handling them again so you don't get finger prints in them. I put two layers on plus I did the sides of the pieces. Give them time between coats to fully dry. This is very important.

• 

  Step 3

  Now you put your design on them. Do whatever you want to make them personal.

  I chose to do animal prints since I love them so much.

• 

  Step 4

  Take a thumb tack and pop holes in a spot in each puzzle piece. Be careful not to hurt yourself!

  It's best to do this with the piece on a hard surface so you don't bend it by accident.

• 

  Step 5

  Put a jump ring through each piece and close them off nice and tight.

  Then put an earring hoop through the jump ring. You can place your seed beads on at this point to give them a little something extra.

• 

  Step 6

  Put one or two coats of Mod Podge on both sides and the edges to seal them from any moisture they may be exposed to.

• 

  Step 7

  And you're done! Be sure to give them lots of time to set and dry properly before using them.

Comments

Leave your comment