Potpourri Sachet

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Cut a 4 inch square of tulle/netting, a 2.5 inch strip from the main fabric, 5.5 inch strip.

• 

  Step 2

  Lay the 2.5 inch strip on table in front of you, place tulle on top so that one edge is along an edge of the strip. Sew with 1/4 inch seam, cut and do the same with opposite edge of tulle (and cut)

• 

  Step 3

  Now you can iron the seams in, so that they can't be seen through the tulle. I didn't want to drag out the ironing board, so I just stitched it down.

• 

  Step 4

  Lay out the 2.5 inch strip again, now placing the long side face down(including main fabric), and sew/cut. Do both sides.

• Step 5

  Now you have the top fabric! Now is the time to cut it down or even it out.

• 

  Step 6

  The backing will consist of two strips of fabric overlapping: this is so you don't need a zipper, Velcro, etc. To begin making backing: take a 5.5 inch strip and fold right edge in 1/8 inch and fold over that (so raw edge is hidden), sew in place. Again, you could iron this or pin in place. I just find it easier (and faster) to guide it and fold in as I go.

• Step 7

  Cut two pieces from sewn strip, that match width of square. Measure easily by laying out strip, place top panel over it and cut a bit larger (leave room for accidents), and cut another.

• 

  Step 8

  Lay the top panel (tulle w/ border) on table face up. Place one sewn strip face down (fold over should face you) on bottom and the second overlapping(with both sewn edges meeting in the middle). All raw edges should be on outer edges. Pin in place.

• Step 9

  Sew on the other side, so you can use the square as a guide.

• 

  Step 10

  Cut edges around stitching, close (less bulk).

• 

  Step 11

  Flip and Fill! You are done!
  I made these as gifts for Valentines Day, and I am still getting compliments. It's a nice way to start the day with rose scented clothes! Enjoy!

Comments

Leave your comment