About
Cute, fun, wallhanger that can take up a small space of wall, to the whole thing!!
Was going to make a magazine wastebasket, and got creative!
-
leksee.swenson favorited Magazine Wall Hanger
25 Feb 02:36
-
Sarah Sylvia S. favorited Magazine Wall Hanger
23 Jul 09:09
-
Cortney R. favorited Magazine Wall Hanger
19 Nov 02:50
-
tiffinni z. favorited Magazine Wall Hanger
24 Apr 17:32
-
Sandra W. favorited Magazine Wall Hanger
21 Dec 14:02
-
Step 1Fold a page of a magazine in half. (If you are already educated on magazine bowls, make as many as you want your wall hanger to have, and skip to step 7.
-
Step 2Unfold, and fold the outsides into the crease.
-
Step 3Fold the outsides into the crease again, and glue.
-
Step 4Coil up. It may be a little tricky your first time, but it'll get easier. (You'll be making quite a few.) Then tape the end to the coil.
-
Step 5This is what you should wind up with. Repeat steps 1-3 and continue coiling around until desired size. Make as many as you want for the wall hanger.
-
Step 6The finished product. I would make at least three or four more, all different sizes.
-
Step 7
OPTIONAL: Cover in modge podge or another varnish or gloss.
-
Step 8Glue all but one together with hot glue. It may take a few times to get it to stay together, but be patient with the glue.
-
Step 9
Sorry for no picture on this one... Take your wire hanger and wire cutters and cut about 8-10 inches. Use needle-nose pliers and make one big loop and one small loop on both ends.
-
Step 10Optional cardboard glued onto the large loop of the wire hook. Hot glue onto the circle not glued on the rest. Hot glue it on to the rest.
-
Step 11Hang!
1
Stud Earrings »
Miraculous Ladybug Earrings
2
Pouches, Purses & Wallets »
Water Bottle Pack
