How To Make A Heart Necklace Very Own And Homemade Heart Pendant Necklace

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Make the skeleton of the heart pendant necklace

  Main materials: one 3m long Nylon Wire, several 12/0 Glass Seed Beads

  Main beading method:

  Part1: find the center position of the Nylon Wire by folding it; then add 12/0 Glass Seed Bead*3 onto the center, finally cross two wire tips through another 12/0 Glass Seed Bead;

  Part2: To the rest part, add 12/0 Glass Seed Bead*1 onto each wire tip and cross two tips through another 12/0 Glass Seed Bead again;

  Part3: to connect the starting part and ending part, in the 37th loop, string 12/0 Glass Seed Bead*1 onto the below wire tip; then feed the other tip through the starting 12/0 Glass Seed Bead; at last, cross the two tips from one more 12/0 Glass Seed Bead. Here the 1st layer of your necklace is finished!

  Attention: as the picture shows, the whole skeleton of the heart pendant necklace can be divided into 37 connected beads loops; here, in this project, in the loop 22,29,30,32,34, you need to string 12/0 Glass Seed Bead*2 onto each wire tip!

• 

  Step 2

  How to make a heart necklace completely

  When get the rough heart shape of your necklace, here you can start to bead the second layer for your heart pendant necklace.

  Main materials: 8/0 Glass Seed Bead*13, Glass Bead*5, several 12/0 Glass Seed Bead

  Main beading method:

  Add proper bead onto each wire tip and then cross both tips from another 12/0 Glass Seed Bead.

  Attentions:

  Attention1: in the 37th loop, string 8/0 Glass Seed Bead*1 and 12/0 Glass Seed Bead*1 onto the above wire tip; then lead the below tip from the adjoining 12/0 Glass Seed Bead in the first layer; finally, cross both tips through another 12/0 Glass Seed Bead.

  Attention2: in the loop 1~7, you just need to add 12/0 Glass Seed Bead*1 onto each wire tip; but between the loop 3 and 4, when lead the below tip from the adjoining 12/0 Glass Seed Bead, you need to weave the wire through two 12/0 Glass Seed Beads in them at same time. This is the concave portion in the heart pendant necklace.

  Attention3: in the loop 8~13, replace the last bead with 8/0 Glass Seed Bead. Furthermore, the number of added 12/0 Glass Seed Bead should add to 2 pieces except in loop 12 (remain add on one 12/0 Glass Seed Bead).

  Attention4: between loop 20~21, repeat the process as same as that between loop 3~4 in attention2. And you will get the convex part in heart pendant necklace.

  Attention5: in the loop 25~27, lead one tip from the adjoining 12/0 Glass Seed Bead in layer1; to another tip, string one 12/0 Glass Seed Bead on it and then cross both tips through an 8/0 Glass Seed Bead. In the loop 28, change the number of added 12/0 Glass Seed Bead from 1 to 2.

  Attention6: in loop 29~33, the tip near the first layer remain weave the adjoining 12/0 Glass Seed Bead, but to the other tip, change the number of 12/0 Glass Seed Bead from 1 to 3, and then cross pass two tips from one Glass Bead. (When facing the loop made of 6 12/0 Glass Seed Beads in layer1, just regarded the two 12/0 Glass Seed Beads as one group)

  Attention7: in loop 34~36, the number of added 12/0 Glass Seed Beads should be: 3pieces, 2 pieces and 1 piece. In the end, tie a knot to finish whole project about how to make a heart necklace.

• 

  Step 3

  The ending work of your heart pendant necklace

  In the loop36, hang on a Jumpring and then add on the Organza Ribbon by using a larks head knot.

Comments

Leave your comment