Gypsy Chic Necklace And Earrings

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Necklace
  Thread the 12mm miracle
  bead onto an eyepin. Trim the
  eyepin 1cm above the bead, bend
  into a loop, add an 8mm jump ring
  and close the loop. Attach the
  wooden heart to this jump ring.

• 

  Step 2

  Thread a 6mm miracle bead
  onto a headpin. Bend the headpin
  into a loop approximately 1cm
  above the bead. Hold the loop
  with the pliers and wrap the
  remaining wire tightly around the
  headpin towards the top of the
  bead. Repeat for all the miracle
  beads.

• 

  Step 3

  Cut five 1.5cm lengths of
  chain. Use a 5mm jump ring to
  add a thre’ penny charm and
  turquoise beaded headpin to
  the bottom of each length.

• 

  Step 4

  Attach an 8mm jump ring to
  one of the lengths of chain, add an
  orange beaded headpin and
  attach to the bottom of the wooden
  heart. Make sure the beaded
  headpins are sitting in front of the
  chain and charm. Repeat to add
  the other chains to the holes in the
  bottom of the heart so they are a
  symmetrical.

• 

  Step 5

  Add a turquoise beaded
  headpin to the 8mm jump
  underneath the 12mm orange
  miracle bead.

• 

  Step 6

  Cut 72cm of chain. Thread
  one end through an 8mm jump
  ring. Add an 8mm jump ring and a
  trigger clasp to one end and an
  8mm jump ring to the other.
  Attach the loose jump ring to the
  top loop of the beaded eyepin.

• 

  Step 7

  Earrings
  Use 5mm jump rings to add the thre’ penny charms and turquoise
  beaded headpins to the bottom of the wooden round coin.
  Thread a rocaille and a 6mm wooden bead onto a headpin.
  Trim 1cm above the bead bend into a loop and close.
  Open a 5mm jump ring, thread
  the wooden round coin and the
  beaded headpin on and close the
  jump ring.
  Open another 5mm jump ring,
  add the long ballwire and beaded
  section and close the jump ring.
  Repeat to make a pair.

Comments

Leave your comment