Glitter Heart Knobs And Rings

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Here's a picture of what you'll need

• 

  Step 2

  Cut your cardboard in squares
  Cut out section of the cardboard so you can slip on the hose clamp just under the screw
  *Make sure it's secure
  Cut small holes in the center of the cardboard squares for the screws

• 

  Step 3

  Mix equal parts of the Glaze Coat for 5 minutes
  Pour 1/4" in each mold

• 

  Step 4

  Fill with your glitter, buttons and confetti
  Pour the Glaze Coat almost to the top of the mold, but not quite
  If you notice bubbles, blow on top of the filled hearts until they pop
  Carefully position the head of the screw inside a Glaze Coat filled heart
  Position the screw part of the hose clamp inside the heart
  Make sure the cardboard does not touch the Glaze Coat
  Let dry overnight OUTSIDE under a cardboard box or in part of the house you're not occupying

Comments

Leave your comment