https://www.cutoutandkeep.net/projects/glitter-heart-knobs-and-rings • Posted by Mark Montano
Make dazzling jewelry and drawer knobs with this simple tutorial using Glaze Coat from Famowood!
Make dazzling jewelry and drawer knobs with this simple tutorial using Glaze Coat from Famowood!
Here's a picture of what you'll need
Cut your cardboard in squares Cut out section of the cardboard so you can slip on the hose clamp just under the screw *Make sure it's secure Cut small holes in the center of the cardboard squares for the screws
Mix equal parts of the Glaze Coat for 5 minutes Pour 1/4" in each mold
Fill with your glitter, buttons and confetti Pour the Glaze Coat almost to the top of the mold, but not quite If you notice bubbles, blow on top of the filled hearts until they pop Carefully position the head of the screw inside a Glaze Coat filled heart Position the screw part of the hose clamp inside the heart Make sure the cardboard does not touch the Glaze Coat Let dry overnight OUTSIDE under a cardboard box or in part of the house you're not occupying