Fairy Fascinator

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  First you need to decide what color you want this clip to be. I chose black. So take a piece of felt in your color choice, and cut it into a tear drop shape.

• 

  Step 2

  I clipped my hair clip to a piece of cardboard so I don't get glue on the inside of it and accidentally glue it shut.

• 

  Step 3

  And now glue your felt drop to your clip.

• 

  Step 4

  Now take a feather with a flat fanned end and carefully cut the feathers off the bottom all the way to the edge of the fan.

• 

  Step 5

  Now do that to both sides.

• 

  Step 6

  And now you can glue it to the tip of your tear drop. You can add more feathers like this if you want want a more fanned out look to it. I would have added more to mine, but I only had one feather like this. All the rest I had are the fluffy looking kind.

• 

  Step 7

  Now start gluing feathers to the bottom edge of the felt, and work your way toward the front. Keep gluing till your felt is covered.

• 

  Step 8

  Now take a few of the fluffy tiny feathers, the ones that have no stem, and glue it down over the tips of the other feathers to cover then stems.

• 

  Step 9

  You should have something like this so far.

• 

  Step 10

  Now take your ribbon, I used this silver thread, and loop it threw your bell and pull the ends threw the loop and pull tight. I made three of these. You can make more or less if you like.

• 

  Step 11

  Now take your bells and your butterfly, or whatever you chose for your focal point, and glue the bells to the back. I made one longer then the others.

• 

  Step 12

  Now glue it to your feathery clip. And your done! And now you'll had a little fairy like jingle everywhere you walk.

• 

  Step 13

  CLIP # 2

  Cut out another felt colored teardrop.

• 

  Step 14

  I chose feathers that had an curved kind of arch to them. Now glue your colored feathers onto the felt.

• 

  Step 15

  Then I glued on a spray of pearls on fishing line. Note - I didn't glue the pearls on the line, I just have NO clue what so ever that these things are called.

• 

  Step 16

  Now take your thread, and loop it threw your bell and pull the ends threw the loop and pull tight. I made three of these. You can make more or less if you like.

• 

  Step 17

  Now you can glue them to your feathers. I made sure where I was gluing them was going to be covered by my butterfly when I glued that on.

• 

  Step 18

  Now you can glue on your butterfly. I also added a few little white flowers.

• 

  Step 19

  I ran outta hair clips, so I had to improvise. So instead I made this clip into a tie on hair ribbon. I used two different colors of ribbon, skinny black, and a ribbed purple.

  I used two pieces of black, and one from the purple. I cut all three lengths at 55 inches (4 and a half ft).

• 

  Step 20

  I held the ribbon on my head at even lengths, then I picked where I wanted the butterfly to sit in my hair. Just above my ear.

  Then I glue the three pieces of ribbon together, on the spot where the butterfly will be, and then glued them onto the back of the felt.

• 

  Step 21

  This is what it looks like finished.

• 

  Step 22

  And it sits in my hair so pretty. Crappy photo with a sucky angle, but you get the idea.

Comments

Leave your comment

Chelsea W. · Toronto, Ontario, CA 16th November 2011

The one with the little flowers is so pretty

Reply