Diy Cement Studs

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Materials needed
  - Cement
  - Pill & Gum Packs
  - Earring posts
  - Glue
  - Copper Gilding
  - Brush
  - Tape

• 

  Step 2

  This DIY is so easy, just pop out the pills & the gums from their packs, remove the outer covering.
  Now prepare your cement mixture and put the cement in the packets with the help of a popsicle stick
  Push the stick against it to avoid air bubbles which will end up being holes if not taken care.
  Scrape off the excess with your stick and tap it to further to settle it down

• 

  Step 3

  For the marble effect, fill in the cavity with around 75% of the white cement to one side and then go ahead with the black one for the rest.
  Now with the help of a toothpick push the black cement inside and keep doing till your happy with the effect.
  I used a see-through packet for the marble effect so I can control the situation better.
  Now let this cure for a day

• 

  Step 4

  Here comes the fun part pop out the cement and they will slide off smoothly.
  And now it’s up to you to choose to leave it as it is or paint it with copper gilding
  You can then tape it the way you desire and paint them and keep aside to dry for few minutes

• 

  Step 5

  Now glue down the earring posts to the cement’s rough side

• 

  Step 6

  You are done now and these studs are simply ravishing, don't you think!

Comments

Leave your comment