Christmas Pasties

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Cut 2 circles from the card

• 

  Step 2

  cut a slit in both to the centre

• 

  Step 3

  measure how far you want to over lap to create a cone

• 

  Step 4

  hot glue in this area

• 

  Step 5

  over lap and smooth the hot glue down

• 

  Step 6

  add hot glue around the edge of the cone, smooth fabric over cone and press down onto the hot glue. Trim away excess

• 

  Step 7

  using hot glue attach sequins in a spiral pattern leaving no space showing

• 

  Step 8

  continue till covered

• 

  Step 9

  paint the inside ( note: the sequins just cover the cardboard edge so they are neat from the front

• 

  Step 10

  Grab your tassels ( or make some with embroidery floss)

• 

  Step 11

  Thread the tail through a large needle

• 

  Step 12

  stab a hole in the point of the cone. and pull tassel tail through

• 

  Step 13

  like so

• 

  Step 14

  tie a knot in the back and trim

• 

  Step 15

  it should look like this at the front, not too tight so that the tassels sit down flat

• 

  Step 16

  cover the knot/point with hot glue and using a small circle of the fabric cover the hot glue and press down flat to smooth out. ( no body wants a scratchy boob) I've then painted over the circle to match the back of the card

• 

  Step 17

  Add some double sided tape or Hollywood tape to the under side and your are ready to go.

Comments

Leave your comment