Bed Crown & Canopy Tutorial

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Fold your sheet in half (vertically) then cut at the fold using sharp scissors. This will create the two panels that will drape over the crib.

• 

  Step 2

  Separate the two pieces and then hem the edges of the sheet using Stitch Witch.

• 

  Step 3

  Create 3" knife pleats at the top of each of the panels. Glue the knife pleats in place using liquid glue

• 

  Step 4

  Iron the fitted sheet. Once you've ironed the wrinkles out of the fitted sheet you need to cut the bottom edges along the inseam so that the sheet is no longer fitted

• 

  Step 5

  Apply Hook and Loop Fabric Velcro to the top of your fitted sheet. This is so that you can attach the fitted sheet to the spring loaded curtain rod.

• 

  Step 6

  Adhere the pleated panels underneath the top of the the bed crown using Scotch Heavy Duty Fasteners.

• 

  Step 7

  Add Chiffon Trim to the edge of the curtain panels. Start by placing the top edge of the trim on the underside of the panel and then gluing it in place with a hot glue gun.

• 

  Step 8

  Place the spring loaded rod into the top of the fitted sheet and push the fabric together so that the entire top of the fitted sheet is on the rod. Now you need to fasten the hook and loop squares to keep it in place.

• 

  Step 9

  Take the Plywood and screw it into the wall where you want to hang your bed crown. Make sure that you screw the plywood into studs for stability. Next you need to hammer two nails into the plywood to hang your bed crown.

• 

  Step 10

  Hang your Bed Crown and Canopy onto the Nails (ensure that it is secure and will not fall)

Comments

Leave your comment