Swirl Wrapped Bead Bracelet

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Hold the wire from any one end but do not cut it from the bundle,
  Insert the bead into the wire,
  Create a loop at the end by using the looping plier,

• 

  Step 2

  Push the pearl bead towards the first loop and create another loop at the other end.

• 

  Step 3

  After you're done making the second loop, twist the wire around the second loop, adjacent to the bead,
  Circle the wire around the twisted wire 4-5 times or as many times as you want.

• 

  Step 4

  After completing the 3rd step twist the remaining wire half way around (diagonally) the bead, to the other end.

• 

  Step 5

  This time, create the outer circle of the second swirl and carefully circle the wire towards the center to complete the swirl,
  Cut off extra wire when done

• 

  Step 6

  When you're done making the swirl wrapped beads, link them through the loops,
  Notice that each bead has an open loop you can easily link the beads through them.
  Link one open loop with a closed loop.

• 

  Step 7

  To make the closure cut a small piece of wire (8-10 cm),
  Bend the wire into half and tighten the bent part using a flat nose plier,
  Use the looping plier to bend the wire again to create a hook-like pattern,
  For the other end use the looping plier to create loop.

• 

  Step 8

  Make as many jump ring as you want (or at least 10),
  Attach the hook with the bracelet through another jump ring.

• 

  Step 9

  Attach the jump rings (5-6) together and link them with the bracelet,
  You can adjust the size of the bracelet by linking the hook with these jump rings.

  There, done!

Comments

Leave your comment