Stargazer Necklace

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Use the needle to thread the silk through one crimp and then through the ring on the toggle bar. Thread the silk back through the crimp and pull until only a tiny bit of silk shows. Use your chain nose pliers to flatten crimp.

• 

  Step 2

  Use the needle to thread the silk through one crimp and then through one bead. Thread the silk back through the crimp and pull until the bead hangs on a small loop of silk and is positioned about 1 inch from the toggle bar. Use your chain nose pliers to flatten crimp. Repeat this, assorting the beads and spacing them all approximately 1 inch along the silk until a 15 inch length of silk is beaded.

• 

  Step 3

  Use the needle to thread the silk through one crimp and then through the ring on the toggle loop. Thread the silk back through the crimp and pull until only a tiny bit of silk shows. Use your chain nose pliers to flatten crimp.

  Repeat these steps to create as many strands of beaded silk as you wish.

Comments

Leave your comment

Shona S. · Belfast, Northern Ireland, GB · 1 project 24th December 2009

It's beautiful. I wish I was able to make it

Reply

James M. 8th November 2009

I love it!!!

Reply