Painted Clutch

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Pretty self explanatory with the stripes. I eye balled mine, you could measure the stripes... But It's such a busy pattern if you're a little off you really don't see it.
  **This is obvious, but make sure you let the paint dry before you tape off the next section.

• 

  Step 2

  1. Pick out a fabric for the liner. I used a dish towel, I liked the pattern and they had a two pack on sale. Cut it with a little seam allowance at the top. So 15.5"x 20.5" then cut that in half.
  2. Line up the zipper at the top of the fabric. Right side of the zipper facing the right side of outer fabric.
  3. Then place the liner fabric, right side facing the wrong side of the zipper. Pin and sew. Repeat the same steps for the opposite side.
  4. You should have a rectangle. Make sure the zipper is open so you can turn the bag right side out. Pin and sew the sides of the bag.
  5. Sew the bottom of the liner. Make sure that you leave a gap in the middle so you can turn the back inside out
  6. Carefully turn the bag right side out... The stiff fabric makes it difficult so go slow. Pin and top stitch the lining closed. Push the lining inside the bag.

Comments

Leave your comment