Illusion Tube Bracelet With Beadalon Bead Stringing Wire

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Gather your materials.

• 

  Step 2

  Cut 6 x 8” lengths of Beading Wire.

• 

  Step 3

  String a Size 2 Crimp Tube on one end of Wire and loop the Wire around the crimp and back through it.

• 

  Step 4

  Crimp the crimp tube.

• 

  Step 5

  Snip the short end of the Wire flush with the Crimp Tube. Repeat to add a Crimp Tube to the end of all of the Wires.

• 

  Step 6

  Using the Size 1 Crimp Tubes, crimp the 6mm beads in place on the wire following a random or symmetrical pattern.

• 

  Step 7

  Add beads to all of the Wires in the same way. Finish the ends of the Wires by making a loop around a Crimp Tube and Crimping it in place. Snip off the excess wire. Make sure that all of your Wires end up about the same length.

• 

  Step 8

  Slip one end of each of the crimped Wires into one of the Tubes.

• 

  Step 9

  Fold down the flap with a Chain Nose Pliers to secure. Slip the other Wire ends into the other side of the Tube Clasp and fold down the other flap to secure.

• 

  Step 10

  Tip: Push the flap against a hard surface to lock it into place.

Comments

Leave your comment