How To Make Leather Jacket Catwalk Fashion

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  First I shaped the sleeve pattern the sleeve used in the original was an enormous short flared sleeve. So i took a sleeve pattern cut the sleeve up at four even points. (if you don't have a sleeve pattern you can create one from a deconstructed sleeve. the overall length was 30 cm so I divided it by 4 to get an even proportional measurement. So I opened up the sleeve pattern 23 cm each panel because I wanted the sleeve to look big and exaggerated like the original.

• 

  Step 2

  i cutthe sleeve pattern out in fabric this was a practic piece so i made it in calico

• 

  Step 3

  i have a half front bodice pattern you cand create this by drawing around a LOOSE vest onto pattern paper. then once i drew the pattern piece i used the slash and cut method to create a side dart.so i cut from the shoulder point into the bust and from the waist i cut into the bust and then i cut cut from the side point into the bust and closed the shoulder dart and the waist dart. to open a side dart.

• 

  Step 4

  i cut the pattern out two on the main fabric. then i sew the darts at the dart point marked out from the pattern

• 

  Step 5

  i cut out the back pattern on fold. again if you don't have a back pattern it can be created from a vest.

• 

  Step 6

  then fold the sleeve in half right sides together and sew.

• 

  Step 7

  sew the front and back together and connect the sleeves. you don't need to hem it or over lock seams leather dosn't fray.

  i made this white on first then i made it in black leather.

• 

  Step 8

  sorry this is step four this is how it should look when you have opened the dart

Comments

Leave your comment