Handmade Jewelry Designs Simple Yet Dignified Pearl Pendant Necklace

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Supplies needed to make the pearl pendant necklace:

  12 & 8mm Acrylic Bead-imitation pearl

  2mm Aluminum Wire

  0.5mm Brass Wire

  Chain

  Mandrel

  Side Cutting Plier

  Round Nose Plier

• 

  Step 2

  Step 1: wrap the frame of pendant

  1. Make a loop at one end of your wire using round nose pliers;

  2. Create a large curve using a mandrel. Curve in the opposite direction of the loop;

  3. Form the 3rd loop with thinner part on mandrel;

  4. Cut the excess tail and you’ll get a frame as below.

• 

  Step 3

  Step 2: add on the pearl beads

  1. Snip a short strand of 0.5mm brass wire, about 20cm is enough;

  2. Anchor the wire on the frame with several turns;

  3. Slide on the smaller pearl bead and wrap certain number of turns to help it stay in place;

  4. Add on the 12mm pearl bead and another 8mm piece in same way;

  5. Affix the end of the wire in the same manner as you did at the beginning of the wire.

  And this is the pearl pendant!

• 

  Step 4

  Step 3: add on chain

  For a pearl pendant necklace, I simply made use of the silver chain. Finally, connect the two tips of the chain using a small jumpring. Or add on a lobster claw clasp if you want your item to be a snug piece.

  The wire wrapped pearl pendant necklace is completed, and it merely took me a quarter of an hour with a budget of less than 5 dollars. All the handmade jewelry designs are simple to make at home, as long as you take the essential tools and supplies.

Comments

Leave your comment

Kt Bing · Edinburgh, Scotland, GB · 66 projects 25th July 2013

I love love love this!

Jersica S. · 163 projects 26th July 2013

Thank u!!!

Reply