Felt Cell Phone Pouch

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Measure your cell phone.
  
  Add 1cm to all sides of the measurements and cut out a double of the measurement so the when you fold the felt in half it can comfortably envelope your cell phone.

  Cut out the lining material too.

  Cut a strip of 2cm width and almost twice the length of you pouch ( my pouch is 13.5cm and the strip is 25 cm)

  Cut out a lining for this too.

• 

  Step 2

  Stitch the soft side of the Velcro to any one side of the felt. See that the Velcro is not wider than the 2cm. Now this will be the front of your pouch.

  Stitch the rough piece of the Velcro to any one end of the lining of the strip.

• 

  Step 3

  Stitch together the lining and the strip together.
  
  Now make a slit 4cm from any one end of the lining. The strip should easily pass through this slit. Secure it with stitches.
  
  See to it that the Velcro should be facing the inside.

• 

  Step 4

  Select any design and make a template.

• 

  Step 5

  Transfer it to a new piece of felt.

• 

  Step 6

  Stitch it onto the front of the pouch, right below the Velcro.

• 

  Step 7

  You can stuff it if you want of let it just be.

• 

  Step 8

  Stuffing makes it look cuter don't you think:)

  P.S :I Forgot to stuff one of its ears :(

• 

  Step 9

  Stitch the lining to the felt so that the strip is in this manner.

• 

  Step 10

  Now make a slit on the back side of the pouch 2cm from the top. The slit should be wide enough to let the strip pass through.

• 

  Step 11

  Fold the entire felt in half, lengthwise and stitch the edges except for the top.

  Pull the Velcrod end of the strip through the back slit and fasten the Velcro.

• 

  Step 12

  Unfasten the Velcro and pull the strip and your mobile pops out!

Comments

Leave your comment