Diy: Blackboard Project

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Start by getting you equipment ready first.
  goggles, jigsaw,

• 

  Step 2

  Now saw how you want the design to be.

  (first timers start with a basic design UN till you are good with the jigsaw)

  Now sand the edges so you don't get any splinters or cuts.

• 

  Step 3

  Lay the wood down on the papered surface and get you tin of black board paint.
  mine was just under a fiver its the only thing i paid for.

• 

  Step 4

  Now paint.
  Always brush in the same direction then leave to dry for 4 hours.

• 

  Step 5

  After 4 hours go back and give it another coat.
  Then leave it for another 4 hours.

• 

  Step 6

  After 4 hours go back and give it another coat then leave for another 4 hours.

  After the last 4 hours turn over and do the same on the other side, but that by choice only.

• 

  Step 7

  I made 2 on for my kitchen and one for my bedroom.
  The kitchen one i painted around the edges with some spare paint.
  Now there both hanging great and getting some use.

Comments

Leave your comment