Cute Clutch Easy And Simple

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  first thing to do is a model for your clutch , so i made my own in paper i draw and then cut out the picture, this will be the bottom of you clutch so you will only use the borders of this first draw you made (this line you see in the middle is just for give the aspect of a clutch lol)

• 

  Step 2

  as you can see in this picture is the top of the clutch, for this top you have to draw the top in another paper and cut it out too, after you have the 2 models you grab your fabric and make with the bottom model 2 pieces of each fabric you've picked to do the clutch bottom and the inside, and to do the top make with the model top, 1 of each fabric you've picked, when you cut the fabric make sure you leave at least 1 centimeter to sew the parts this is valid for every part you've cuted

• 

  Step 3

  after cut you have to sew so begin to sew two parts leaving the top open this picture is from the outside and bottom clutch part, do the same for the inside fabric you cuted, after that you do the same with the top BUT the top will be diferent because you only have 2 pieces sew them and turn out as you've done with bottom parte now that you have the parts sewed you'll have to connect them, sew the top with bottom, had some velcro and you're done!!! :)

• 

  Step 4

  i forgot to connect the two parts pin them and has you sew take them off i will be perfect, and voilá hope you've liked :)

Comments

Leave your comment

zarish a. · Karachi, Sindh, PK · 4 projects 3rd May 2010

adorable

Reply