About

Cost
$ $ $ $ $
Difficulty
• • • • •
Time
1h00

a cute, simple way to store your CDs in the car!
This is just a cute, simple little thing to store your CDs in your car! I just used fabric I had left over from an old project. The way I had mine set up holds 6 CDs, but of course you could alter it to have two back to back, or even fit more CDs on the same piece!

Posted by Kacie W. from Washington, District of Columbia, United States • Published
PrintEmbed
  • How to make a cd cover. Car Cd Holder - Step 1
    Step 1

    For the first step, cut out a piece of fusible interfacing that is 12.5 inches by 6 inches.

  • How to make a cd cover. Car Cd Holder - Step 2
    Step 2

    Next, cut out a piece of fabric that is an inch bigger on all sides then the piece you just cut. This piece should be 14.5 inches by 8 inches.

  • How to make a cd cover. Car Cd Holder - Step 3
    Step 3

    Then, cut out out a piece of fabric that is the same size as the fusible interfacing which was 12.5 inches by 6 inches.

  • How to make a cd cover. Car Cd Holder - Step 4
    Step 4

    Next, you will want to cut out 6 pieces of fabric that are 6 inches by 8 inches. I forgot to take a picture of this, but I choose 3 of a solid color and 3 of my original fabric. Then, take these pieces and fold them in half with the right side out. Place this piece (with the fold up) on the fabric. I used a CD to determine how far down it would need to be so the CD would not hang off the top. Pin This in place.

  • How to make a cd cover. Car Cd Holder - Step 5
    Step 5

    Do this for all of your pieces. My pieces overlapped, except for the 1.5 inches that showed. I didn't measure this, so more or less. It doesn't have to be precise, just make sure the CD will be able to fit in all of the slots.

  • How to make a cd cover. Car Cd Holder - Step 6
    Step 6

    Flipping the pieces to the other side, I sewed around the two sides and the bottom of the first flap, pivoting at the corners. I drew a line to show where to sew... I sewed it on the edge of the presser foot.

  • How to make a cd cover. Car Cd Holder - Step 7
    Step 7

    Then, I took my sissors and just trimmed off all the stray pieces of thread and made the fabric line up better on the sides.

  • How to make a cd cover. Car Cd Holder - Step 8
    Step 8

    Next, I simply flipped over the next fabric and sewed it the same way.

  • How to make a cd cover. Car Cd Holder - Step 9
    Step 9

    After, I placed this piece with the bigger piece together with the wrong sides together. With the excess fabric, I folded it in half, then folded it over the piece we just made. This should cover all the lines you just sewed, along with any raw edges.

  • How to make a cd cover. Car Cd Holder - Step 10
    Step 10

    For step ten, I just continued doing step nine. I did both of the long sides, and then did the shorter sides. Make sure you do opposite sides, then the other opposite sides. I also used a lot of pins to make sure that it would lay nicely. Make sure you focus on corners being straight.

  • How to make a cd cover. Car Cd Holder - Step 11
    Step 11

    When I sewed this part, I sewed as close to the inside edge as I could.

  • How to make a cd cover. Car Cd Holder - Step 12
    Step 12

    For the final step, I sewed the corners. This was just to sew them down because they were not completely secure.

  • How to make a cd cover. Car Cd Holder - Step 13
    Step 13

    And here is your final product!

Made this project? Share your version »

Comments

PinkWeeds
PinkWeeds · Omaha, Nebraska, US · 207 projects
This will be an awesome gift for my boyfriend!
Reply

More Projects