Champion (Number 1) Card

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Draw a picture frame on the card’s front side. Make sure the pencil lines are very thin, so you can easily remove them later.

  Draw a human shape, starting from the bottom side of the frame. Draw a head and upper body part which are attached to each other.

• 

  Step 2

  Cut out the inner area of the picture frame with a craft knife. Remove all visible pencil lines.

• 

  Step 3

  Grab the waste card paper. Cut out two paper stripes of 1.6 inch (4 cm) x 0.2 inch (5 mm).

• 

  Step 4

  Take the red & blue colored paper sheets and cut out two paper stripes of 1.6 inch (4 cm) x 0.1 inch (3 mm).

• 

  Step 5

  Glue a red & blue paper strip on both sides of a white paper strip. Do this also with the other white paper strip.

• 

  Step 6

  Put both strips upside down on the card’s front side. Measure where they should appear on the human shape (shoulder) and make the strips come together like a V shape. Attach these two parts by gluing them together or use sticky tape.

• 

  Step 7

  Cut off the edges a bit to make it look realistic.

• 

  Step 8

  Cut out a small bowl, a bar and a big circle (the medal) from a sheet of yellow colored paper and glue them together.

• 

  Step 9

  Glue the medal onto the ribbon shape.

• 

  Step 10

  Cut off the ribbon paper which is standing out on the shoulder parts.

• 

  Step 11

  Take a sheet of colored paper (the person's favorite color) and put the card’s backside on top of it. Draw a border around it with a pencil, so you can estimate the card’s measurements.

• 

  Step 12

  Draw number ones or stars in the area with a pencil. To make them all look the same, you could make a template, cut it out and trace it with a pencil several times.

• 

  Step 13

  Cut out the drawn shapes and glue the sheet to the card inside (or use double-sided adhesive tape).

  Cut off the excess paper and your card is ready!

Comments

Leave your comment