Cut Out + Keep

Woven Accordion Book

Woven Accordion Book (two-sided)

https://www.cutoutandkeep.net/projects/woven-accordion-book • Posted by Painted Paper

Bonnie Thompson Norman works full time for a commercial bindery, but evenings and weekends devises new bindings and teaches letterpress printing and book arts classes in her studio in Seattle, Washington. In 2002, Bonnie sent me a new book structure she designed. It is a Jacob’s ladder made out of paper: a woven accordion. I sometimes refer to it as “Bonnie’s Ladder.” Sometime later, I realized that Ed Hutchins had sent me a version of this structure, but with many more slits, in 1999. To make it function, you have to separate the pages because they do not naturally drop open like the child’s toy. Making one is easier than making the traditional toy; all you do is cut slits and weave cards. No adhesive, ribbon, or thread is necessary. An advantage to this structure is that you can arrange the cards until you get a pattern that you like. If you don’t like one card, cut another from the extra scraps and reweave it. This structure changes the painted paper into a dynamic sculpture or interesting card. You will need to paint both sides of one large piece of heavyweight paper. Example Size 23⁄4" x 5" (7 cm

You will need

Project Budget
Cheap

Time

1 h 00

Difficulty

So-so
Medium book 1267198339

Description

Bonnie Thompson Norman works full time for a commercial bindery, but evenings and weekends devises new bindings and teaches letterpress printing and book arts classes in her studio in Seattle, Washington. In 2002, Bonnie sent me a new book structure she designed. It is a Jacob’s ladder made out of paper: a woven accordion. I sometimes refer to it as “Bonnie’s Ladder.” Sometime later, I realized that Ed Hutchins had sent me a version of this structure, but with many more slits, in 1999. To make it function, you have to separate the pages because they do not naturally drop open like the child’s toy. Making one is easier than making the traditional toy; all you do is cut slits and weave cards. No adhesive, ribbon, or thread is necessary. An advantage to this structure is that you can arrange the cards until you get a pattern that you like. If you don’t like one card, cut another from the extra scraps and reweave it. This structure changes the painted paper into a dynamic sculpture or interesting card. You will need to paint both sides of one large piece of heavyweight paper. Example Size 23⁄4" x 5" (7 cm From the book Painted Paper by Alisha Golden. Read our review here.

Instructions

  1. Small screen shot 2010 02 26 at 15.36.40 1267198615

    Using the pencil, ruler, knife, and cutting mat, divide and then cut the paper into two 22" x 5" (55.9 cm x 12.7 cm) strips (these are now grained short); reserve the remaining paper for other projects.

  2. Small screen shot 2010 02 26 at 15.37.03 1267198669

    Select one strip to make the accordion and choose one side to be the front. Place the strip, front-side down, horizontally on your work surface. Fold the strip in half, aligning the edges.

  3. Small screen shot 2010 02 26 at 15.37.08 1267198674

    Unfold the strip. Fold each edge in, aligning it with the center fold. In origami, this is called a cupboard because of its shape.

  4. Small screen shot 2010 02 26 at 15.37.13 1267198690

    Now fold each top section back, aligning the edges with the existing folds—like opening the shutters on a window. Turn the folded paper over.

  5. Small screen shot 2010 02 26 at 15.37.20 1267198700

    Now it looks like a table. Fold the paper again, aligning the folded ends with the center fold.

  6. Small screen shot 2010 02 26 at 15.37.24 1267198743

    Unfold the paper. You should now have a fan fold with alternating valleys and mountains.

  7. Small screen shot 2010 02 26 at 15.40.18 1267198867

    Unfold the accordion strip completely and flatten it, arranging it so there is a valley fold at each end; you should see three complete mountains. Measure and mark 2" (5 cm) from the top edge and 2" (5 cm) from the bottom edge on the valley fold at each end.

  8. Small screen shot 2010 02 26 at 15.40.24 1267199003

    Place the flattened accordion on the cutting mat. Using the ruler to guide the knife and beginning and ending exactly on the outermost valley folds, cut a slit parallel to the top edge to connect the top marks. In the same way, cut another slit to connect the bottom marks.

  9. Small screen shot 2010 02 26 at 15.40.30 1267198891

    Cut the second 22" x 5" (55.9 cm x

  10. Small screen shot 2010 02 26 at 15.40.37 1267198903

    Weaving the Cards With the accordion still flattened and face up, lift the long center strip and slide one card under it; slide the card to the left, snug against the end of the slits.

  11. Now hold down the long center strip and, starting from the back of the accordion, weave a card over it and out to the back again. & Make sure the card is snug against the first card.

  12. Small screen shot 2010 02 26 at 15.40.41 1267198925

    Repeat the weaving process for the remaining cards, alternately inserting them under or over the center strip and tightening them as you go by sliding them over to the previous card. When you are finished, accordion-fold the book. Note: To make three 2 3⁄4"