Wire Jewelry Diy How To Make Rings In Butterfly Pattern

Wire jewelry DIY - how to make rings in butterfly pattern

Posted by

About

This tutorial is going to demonstrate you a way about how to make rings in butterfly pattern; in this tutorial, you will find wire jewelry diy is really a fancy thing to do.

Share

You Will Need (4 things)

  • Round Nose Pliers
  • Flat Nose Pliers
  • Wire Cutters
  • Marker Pen(s)

Steps (5 steps, 120 minutes)

  1. 1

    Materials and tools:

    1.5mm pink aluminum wire

    Round nose plier

    Flat nose plier

    Wire cutter

    Marker pen (or any ring mandrel)

  2. 2

    Step 1: make a heart pattern at one end

    1st, snip a length of 30-35cm alum wire;

    2nd, form a P shape with round nose plier;

    3rd, at the top position of P, counter-clockwise wrap a tiny loop;

    4th, shape a heart pattern and coil the rest wire below heart.

  3. 3

    Step 2: make another heart at other end

    1st, pick a piece of thread and measure the circumference of finger;

    2nd, decide the length you should leave for ring base;

    3rd, make another heart in opposite direction.

  4. 4

    Step 3: finish the butterfly ring

    Wrap wire around marker pen and shape out the full ring.

  5. 5

    The finished work will look like this:
    Tada, our how to make rings tutorial is done. During this wire jewelry diy, different colors, sizes and even diversified butterfly patterns can be experimented and applied into this sort of jewelry making.