Wire Christmas Tree

A unique tree for Christmas time.

Posted by melindadanielle

About

Sorry for not having pictures with the steps... maybe next time I make one, I'll remember to take pictures and upload them here.

Share

You Will Need (4 things)

  • 1 Wooden Base
  • Wire
  • small Ornaments and presents
  • Clay

Steps (6 steps, 150 minutes)

  1. 1

    I start from the base of the tree going up. Twisting very tightly at the base part and loosely at the tree part.

  2. 2

    Next, I screw the tree into the base.

  3. 3

    Then, I glue the presents around the base of the tree.

  4. 4

    Next, I add the ornaments to the tree. (I usually follow a pattern of colors)

    If the holes in ornaments are a little bit to big for the wire I just hot glue each one down on either side of the hole so it won't move.

  5. 5

    Then I take clay (that I cut into the shape of a star and baked) and put it at the top of the tree (sometimes twisting the wire will hold it into place other times glue will)

  6. 6

    At the end, if the tree is a bit too wobbly or is leaning to much on one side, I tend to tie it to the presents at the bottom to stabilize it more.

    Enjoy!