https://www.cutoutandkeep.net/projects/wire-button-bracelet-3 • Posted by Fashionisda T.
A simple and quick project. <3
A simple and quick project. <3
You'll need a pair of scissors, a wire, and a button. I forgot to take a picture of the button -_-;;
Measure around your wrist. Add about 2-3 extra inches on the wire and cut. Then, cut 3 wires of the same length.
Tie the wire. Leave about an inch allowance on the top.
Braid down. If you want more volume on your braids, make them loose. If you want a tight braid, tighten the braid as you go.
Take the button. Insert 2 strands of wire into the button. Leave the 3rd strand.
Take the 3rd strand. Insert it through the opposite side and pull down.
Continue braiding.
Tie a loop on the opposite side. Make sure that the loop is not too tight or too loose.
Cut off the excess wire. I used the excess to make a ring.