White Strappy Flip Flops
cute tie up flip-flops!
Posted by Izzy P.
About
Share
You Will Need (5 things)
- An Old Pair Of Flip Flops
- ½ White Paint
- Clear Finishing Gloss Spray
- 2 lengths of 135cm Cord
- Skewer
Steps (8 steps, 180 minutes)
-
1
First find an old pair of flip-flops and cut off the straps. Then paint them white all over (you don't have to paint the bottom).
-
2
Once the paint has dried spray the flip-flops with permanent clear gloss finish.
-
3
Once this has dried, spray on another coat and let this dry completely (this should take 1-2 hours).
-
4
Now we can cut the cord. Cut two lengths of cord, both 135cm. Fold each length in half and tie a SMALL knot at the top.
-
5
Turn the flip-flops over and thread the cord through the top hole (you may need the skewer to push the cord through the hole as it is quite small).
-
6
The shoes should now look like this.
-
7
Now thread the two bits of cord into the other holes to make the straps.
-
8
Now you can wear the shoes!! Put the shoes on and tie the cord around your ankles or anyway you like. Have fun!