Watch Enhancement
Watch makeover- Time to for some character!
Posted by
About
I used an inexpensive watch that I've had for awhile. Functional but it lacks character. The band has a scale texture to it but it really isn't noticeable till painted. Time for a makeover!
Share
You Will Need (8 things)
- Studs
- Pliers
- Mod Podge
- X Acto Knife
- Nail Polish
- Acrylic Paint
- Paint Brush
- Watch
Steps (6 steps, 60 minutes)
-
1
Start by cleaning your watch for a good painting surface.
-
2
Next paint on your color of choice. Use more or less paint depending on the look you want. I used 2 layers of acrylic paint. I wiped off a little bit before it dried so the that most the paint ended up in the nooks and crannies.
Let paint dry thoroughly.
-
3
Then I used silver fingernail polish to paint a detail line around the edge of the watch band. I used nail polish because it was the only silver paint I had :)
Again let dry thoroughly.
-
4
Since I used a water based paint it needed to be sealed. Brush on 2 or 3 layers of Mod Podge (or some product along those line).
Sorry if I sound like a broken record, but here goes- Let dry thoroughly!
-
5
Now decide where you want your studs. I used an x acto blade to make starter holes for the prongs of the studs. Punch prongs through the band.
-
6
Then flip over watch and use a pair of pliers to bend prongs over to secure. Repeat with the rest of your studs.
Most important step- Enjoy your new one of a kind watch!