https://www.cutoutandkeep.net/projects/washi-tape-earrings • Posted by CraftyHope
Washi tape is a relatively new supply on the craft scene. However, the patterns and color combinations on them are endless. It’s a versatile material for any artist to keep on hand, as you will see in these earrings.
Washi tape is a relatively new supply on the craft scene. However, the patterns and color combinations on them are endless. It’s a versatile material for any artist to keep on hand, as you will see in these earrings.
Paint front, back, and sides of wood tags with acrylic paint and allow to dry. This could take several layers, depending on the paint/color.
Place painted wood pieces evenly side by side on a non-stick craft mat (wax paper would also work). Apply first strip of washi tape to both tags at once, starting in the center of the tag. Use a bone folder (or other tool for rubbing) to secure the tape to the tag.
Work outward from the center, applying more tape. Make sure to rub down/secure the tape as you go.
Use scissors to carefully cut between the two tags.
Peel tags from the working surface, one at a time, and flip them over to keep them from sticking back to your work surface.
Trim off excess tape. Then, rub down the tape again, paying special attention to the edges.
Using a straight pin (or other poky tool), poke through and open up the holes in the tags.
Apply a thin layer of mod podge (I used matte) or other paper sealer to the front and sides of the tag. Allow it to dry completely.
Top with a dimensional glaze (diamond glaze, glossy accents, resin, etc.). Avoid the open hole. Allow it to cure.
Seal the backs with mod podge.
Attach each ear wire with jump rings.
Additional Notes: *Wood tags work great for this project because holes are already drilled at the center top of them. However, you could use thin wood pieces and drill your own holes just as easily. * As some areas of the tape can be transparent, remember to select background paint that will accent the washi tape’s patterns and not allow it to blend in. * I place a dome/bowl over the pieces while they cure to prevent dust/hair from sticking to them. * I used two jump rings on each earring to help ensure that the patterns face forward while hanging.