https://www.cutoutandkeep.net/projects/valentines-badges • Posted by
Cute fun way to use vintage papers, old valentines cards, pictures from magazines for a fashionable and fun brooch for Valentines day for yourself or to give as gifts.
Cute fun way to use vintage papers, old valentines cards, pictures from magazines for a fashionable and fun brooch for Valentines day for yourself or to give as gifts.
Find your images. I decided to use my own artwork and printed these from photoshop. Since the badge is 1.5" I made my squares 1.65" so that I would have a little room to play around with.
Trace around the wooden heart onto your image, making sure everything you want is inside the heart.
Carefully cut out the heart shapes. Stay on the inside of your heart line so that it will not show on the badge. Smooth around the edges as best as possible.
Using PVA or other glue intended for paper, glue your images to the wooden heart. Cover the front entirely. If there is a little hanging over the edge, there will be an opportunity to trim this down later, but try and get your best fit.
Let your images dry for a few hours.
Using your Mod Podge, spread a thin even layer over the top of the image. This is important if you printed your image on an ink-jet printer, so that the ink won't bleed or run when you use a sealer. It also hardens the paper and makes it easier to trim your edges once dry.
Using your nail file (or sandpaper), smooth any uneven edges of paper, especially around the curves.
Using the Diamond Glaze, cover the image with an even layer, trying to avoid bubbles. (these can be popped with a toothpick or moved off the edge.) Alternately, you could use a spray sealer, or resin if you prefer.
At first, they will be cloudy, you can adjust or add any diamond glaze as needed in the first few minutes but it is best not to touch the glaze for at least 12 hours - perhaps longer as finger prints will show. Lay on a flat surface and let dry.
Once dry, use your E6000 glue to adhere the pin backs to the back of the badge. I use a stick to dab just a little to the back of the badge and press the pin back securely into place. Be sure to make sure the pin back works before you glue it to the badge, these packets tend to have 1 or 2 dud pins.
Be patient and let the backs dry for several hours.
Ta-Da!! You're done!
Wear your badges and/or give them as gifts!