https://www.cutoutandkeep.net/projects/upcycled-punk-collar • Posted by Vermin Jerky
I had a small clutch with way more pyramid studs on its strap than strictly necessary. I've been wanting to do something with the excess. An idea finally occurred to me, then I was able to put together my idea in my mind with materials I already had. The strap came from a cruddy old purse, the spikes and jump rings came from an earring, and the Velcro was left over from another choker project. It's really easy to make. Here's how: Cut the strap (an old thin belt would also work well) to the right length for your neck. Place the studs where you want them and push them in, slipping a jump ring with a spike on it under the bottom prong of the stud before you fasten it down. You can put one stud on the end of the collar that will show at the back. Then glue some Velcro to the inside of one end and the outside of the other with a strong glue (I used E3000). (Put the soft side of the Velcro on the inside of the collar so that it won't be uncomfortable if it touches your skin.) Glue or stitch the cut ends of the strap so the seams won't come open. Note: Project time is only construction time, it doesn't include the time necessary for a strong glue to dry.
I had a small clutch with way more pyramid studs on its strap than strictly necessary. I've been wanting to do something with the excess. An idea finally occurred to me, then I was able to put together my idea in my mind with materials I already had. The strap came from a cruddy old purse, the spikes and jump rings came from an earring, and the Velcro was left over from another choker project. It's really easy to make. Here's how: Cut the strap (an old thin belt would also work well) to the right length for your neck. Place the studs where you want them and push them in, slipping a jump ring with a spike on it under the bottom prong of the stud before you fasten it down. You can put one stud on the end of the collar that will show at the back. Then glue some Velcro to the inside of one end and the outside of the other with a strong glue (I used E3000). (Put the soft side of the Velcro on the inside of the collar so that it won't be uncomfortable if it touches your skin.) Glue or stitch the cut ends of the strap so the seams won't come open. Note: Project time is only construction time, it doesn't include the time necessary for a strong glue to dry.