Unique Jewelry For Mom Diy Dainty Rings Out Of Gauges Of Wires

Unique jewelry for mom-diy dainty rings out of gauges of wires

Posted by

About

If you are planning on designing a unique jewelry for mom, I may recommend this project about how to diy dainty rings out of different gauges of wire only. It does actually look easy enough!

Share

You Will Need (1 thing)

  • Brass Wire

Steps (10 steps, 120 minutes)

  1. 1

    Supplies needed in diy dainty rings:

    0.5mm Brass Wire (or other size ones)

    Cylindrical Stick

    Side Cutting Plier

    Flat Nose Plier

  2. 2

    Step1: Prepare three strands of the wire, each about 20cm long. The length may determine the size of decorative “rose” on upon your ring;

  3. 3

    Step2: Wrap both three strands around the stick once;

  4. 4

    Step3: Rotate the two wire ends in clock-wire direction. Pull them as tautly as you can;

  5. 5

    Step4: Keep rotating the two ends in same direction;

  6. 6

    Step5: Stop until the focal “rose” reaches your desire pattern;

  7. 7

    Step6: Take the ring off the stick;

  8. 8

    Step7: Wrap the excess wire tails to hold the ring blank coils together;

  9. 9

    Step8: Do the same process on the other side;

  10. 10

    Step9: Try with other gauge of wire you want!

    Did the diy dainty rings spark more thoughts about unique jewelry for mom? Whether an item adorned with birthstone or include someone’s name, the handcrafts can definitely embody the unspeakable emotions and feelings deep in heart.