https://www.cutoutandkeep.net/projects/typewriter-keys-earrings • Posted by Risa.Hanae (JapZilla)
There is really no significance to the numbers that I chose, as these were the only two numbers I had Lol. However, You should make the numbers/letters significant since that is way cooler. I plan to make ones with letters soon.
There is really no significance to the numbers that I chose, as these were the only two numbers I had Lol. However, You should make the numbers/letters significant since that is way cooler. I plan to make ones with letters soon.
Gather your supplies. ~4 copper Jump Rings ~2 copper fish hook earrings ~2 typewriter keys ~4 lengths of chain
I have cut the lengths of chain to be 6 links long.
My typewriter keys have pre-drilled holes.
Take one of your jump rings and put it through one of the holes.
Take a link of chain and attach one of the end links to your jump ring (as shown in the picture).
<<<It should be attached like this.
Now take another jump ring and put it through the other hole. Attach another length of chain as before.
<<<It should look like this now.
Take your ear hook and open the loop at the bottom.
Attach one of the chains to the ear hook.
Now here you will have to fight with it a little. <<<See here it is twisted. You'll have to play around with which way the chains are attached.
Once you have figured that out, close the ear hook loop. And done with side 1.
Now repeat steps 4 - 12 for the other earring and you'll have a cute pair of earrings!