Twinkling Branches Room Divider
Make a magical room divider with twigs and twinkling lights!
Posted by Mark Montano
About
Make a room divider with your leftover Christmas tree lights and bare twigs from the back yard.
Share
You Will Need (13 things)
- 12 - 60" long Tree branches
- Sanding Block
- Wax
- Paintbrush
- Americana Decor Chalky Finish Paint in Rustic and Serene
- Wire Cutters
- Thick galvanized Wire
- 4 - 2" long Hinges
- Drill
- 18 - 3/4" Wood screws
- 24 -1 1/4" Wood screws
- 6 - 60" long 1"x3" pine Board(s)
- 6 - 24" long 1"x3" pine Board(s)
Steps (5 steps, 300 minutes)
-
1
6 - 24" long 1"x3" pine boards
6 - 60" long 1"x3" pine boards
24 -1 1/4" wood screws
18 - 3/4" wood screws
Drill
4 - 2" long hinges
Thick galvanized wire
Wire cutters
Americana Decor Chalky Finish in Rustic and Serene
Paintbrush
Wax
Sanding block
12 - 60" long branches -
2
Create four 24" x 60" frames by connecting each corner with two 1 1/4" long wood screws
Connect the frames together using the 2" long hinges
*make sure that the frames are in a zigzag pattern
Drill three screws on the top and bottom of each frame leaving 1/4" sticking out -
3
Attach the galvanized wire around the 3/4" screws from top to bottom
on each of the three frames
*You will be attaching the branches to these wires
Paint the edges of the room divider with the Rustic Chalky Finish paint
*You can be messy with this color
When dry, rub wax over the Rustic paint
Paint the entire room divider in the Serene Chalky Finish and let dry -
4
Watch the video tutorial here:
-
5
Sand the edges of the room divider to expose the Rustic color underneath and to give the room divider a shabby chic/antique feel
Cut about 30 - 5" long pieces of wire
Attach the branches to the wire that was stretched from the top to the bottom
of each frame of the divider
*Clip the branches that extend over the edges
Wrap the white Christmas tree lights around the branches and plug in!