Tripp Accessories

a use for the scraps leftover from my tripp skirt project

https://www.cutoutandkeep.net/projects/tripp-accessories • Posted by Tai

You will need

Scraps From Tripp Pants Needle And Thread Or Sewing Machine 4 Button(s)

Project Budget

Time

Difficulty

Description

Instructions

1. 

   For the wrist band take your Tripp skirt scrap and cut it to fit your wrist.mine is about 8 1/2 inches.Then finish the edges,i used white tread on the top bottom and left side to match the original white tread on the right side.

2. Do the same to make the choker,but trim the width down to 1 1/2 inches, and cut the length to fit around your neck.mine is about 15 1/2 inches long.but i have a skinny neck,so make sure yours fits you.

3. 

   take your two buttons and sew them on the wristband about 1 inch from the edge.and snip two small holes on the opposite side the same length from the edge.

4. 

   for the choker I used two smaller buttons in white.and followed the same steps.if you want the choker tighter or looser place the button holes closer or farther from the edge.