Tin Labels From Soda Cans
Faux metal stamped labels from soda cans
Posted by Amy E.
About
Cut off the top and bottom of a soda can and turn it into a faux metal stamped look label.
Share
You Will Need (9 things)
- Soda can
- 2 Small Wooden Plank
- ½ Black Marker
- Black Ink pad
- Scissors
- Handsaw
- Hot Glue
- Sand Paper
- 1 Hand Drill And Bit
Steps (4 steps, 120 minutes)
-
1
Cut out the top and bottom of a soda can, carefully while wearing protective gloves. Lay the blank side down and write wording backwards on the metal with a ball point pen.
-
2
Flip the metal over, trim it down and then rub the ink pad over the lettering to accentuate the letters.
-
3
With the handsaw, cut out pieces of wood from the wood planking. I used the type of plank that one would cook fish on.
-
4
Drill a small hole (for the string), lightly sand, and then give it a coat of poly. Hot glue the metal labels to the wood pieces and then thread the string through the hole.