Super Easy Labels

Want easy labels without all that expensive iron-on paper? Read this tutorial IMMEDIATELY!

Posted by Lisa <3

About

I've seen a bunch of label tutorials around, but all require some iron thing. Well, now here is a way easier way to create them, with just ribbon and a printer. This is an "easy as pie" project that takes almost nothing to create! Have fun with your fabulous labels. This was WAY too easy to even need pics!

P.S. Sorry AGAIN for the bad webcam quality. I DID have a new computer (because this one wasn't working) but then it broke down and this one worked again.

Share

You Will Need (4 things)

  • Clear Nail Varnish or anything to keep the ends from fraying
  • 1 Normal paper Printer
  • 1 packets White Ribbon or any colour you prefer.
  • 1 roll of Masking Tape

Steps (4 steps, 60 minutes)

  1. 1

    First, go to Microsoft Word and type out how you want your labels to look and what it will say.

    You can copy and paste this several times to make many labels at once. Be sure to leave some room so the ribbon will fit over top!

    Print this paper.

  2. 2

    Next, cut out the appropiate length and amount of ribbon needed to cover the words.

    To keep the ends from fraying, coat just the edges with nail polish.

  3. 3

    Add some tape and each end, and put the ribbon over the words (on the page printed) carefully, so it will print where you want it.

    Put the sheet (with the ribbons) upside down in the printer.

  4. 4

    Press the print button. You're basically done now! Just peel the tape off and VOILA!