Splat Light Switch Cover
fun and messy.
Posted by Molly G.
About
I love splatting paint and wanted to make my light switch more interesting :)
Molly ^_^
Share
You Will Need (9 things)
- Sticky Back Plastic
- Paint Brush
- Paint (different colours)
- Scissors
- Ruler
- Pencil
- Paper
- Light Switch
- Double Sided Tape
Steps (8 steps, 30 minutes)
-
1
Measure your light switch and add a border.
-
2
Cut out the square/rectangle. Snip from the corner of the border to the corner of the middle so that you can fold.
-
3
If the corners overlap cut a half moon shape.
-
4
Fun bit!
Put something down to protect the surface and choose your colours ( i used red, yellow, green and blue ) And mix them with water. This will make it easier to spalt.
Now....SPLAT. You can do this as much as you want.
-
5
Wait to dry.
You can use a hair dryer to speed up the progress ( i let it dry naturally ) But make sure you stick it down with blue tac so it dosent blow away!
-
6
To make it last longer use some sticky back plastic. Refold and cut the corners.
-
7
Measure where the switch is and cut it out.
-
8
Stick onto the light switch with blue tac, sellotape or double sided tape.
Done! :D