Soft Kinky Collar

Fun for S&M beginners and kinky fantasy play

Posted by Alisa N.

About

I've been curious about S&M for a while and figured I'd make some beginner's stuff to play with ;)

Share

You Will Need (4 things)

  • ¼ Belt Clasp
  • Sewing Materials
  • ½ yd Fabric
  • optional Large Metal Ring

Steps (8 steps, 60 minutes)

  1. 1

    Sketch out general shape on scrap or extra material

  2. 2

    Cut it out and test the fit and how it lays on your neck. Alter it if needed. Then use the cut-out as a stencil for the real one.

  3. 3

    Once you have traced the shape onto the inside of your fabric of choice, add about a centimeter of space on all sides. This will be your hem line to prevent your fabric from falling apart.

  4. 4

    Cut out the collar and be sure to leave plenty of extra material to wrap around the back, you can trim it later.

  5. 5

    Fold over the hem and hand sew or run it through a sewing machine. If you are adding the ring, figure out now how you want it to hang.

  6. 6

    I had an old watch from when I was a child laying around, so I stole the clasp from it to use on the back of my collar. These can also be purchased, I just didn't want to go get a new one.

  7. 7

    Now the clasp is attached, holes for the belt clasp are punctured on the other side of the collar, and I did a little embroidery on the front to cover the stitches from sewing material around the metal ring.

  8. 8

    And there you have it!

    If a strong material is used, this should hold up against any chained-up fun you have in mind!