Snowchain Toilet Paper Hanger
a eyecathing rock 'n roll item for your toilet
Posted by cutelittledevil
About
I made this toiletpaper holder from a snowchain i got for 50cents at a fleemarket :)
It's meant to hold 4 rolls of toiletpaper of wich the bottom one is used (the rest is stock)
Share
You Will Need (4 things)
- 1 x Vice
- 1 x cutter Power Tools
- Screwdriver
- 1 x pewag alaska super
Steps (6 steps, 60 minutes)
-
1
Take a snowchain, mine looked like 6 times a H with a chain on top and bottom to keep it together.
I don't know how snowchains from other brands look.First we are going to take the H-shapes appart from the chain.
-
2
To get loose H shapes. Put the links that keep the H and the chain together with their back in the vice. an use a screwdriver to open them.
You will need these links to put the H-shapes together later!! -
3
Find someone who is used to handeling power tools to cut the chain.
Cut the link where i drew the red line. On al the H you are using (i used 4) -
4
Now we are going to reasamble the parts to be a toiletpaper holder.
Snowchains aint straigt, so check if the spaces between the holders are even, else turn the chain arround so it is.
I used the vice to close those links from step 2 again, since i didn't managed to do so with a hammer.
It shoot look something like the image now. (arrows point at those links from step 2)
-
5
With the snowchain set came also this rubber band with hooks.
I cut the rubber band, and opened the hooks. (in the vice with a screwdriver)Now attach those hooks to those little loose chains (i used the vice to close them)
-
6
And well then you are done
I chose to use the thing that probably gets used to attach the chains to cartires. So people sitting on my toilet may see it is assembled from a snowchain.