Cut Out + Keep

Snow Fox Tail

i luv this hanging on my belt

https://www.cutoutandkeep.net/projects/snow-fox-tail • Posted by Alexandra Graves

my second tail. its about 14 inches long and supper fluffy

You will need

Project Budget
Cheap

Time

7 h 00

Difficulty

Nice & Simple
Medium 103515 2f2014 07 24 040510 tail%2b002

Description

my second tail. its about 14 inches long and supper fluffy

Instructions

  1. Small 103515 2f2014 07 24 040840 tail%2b003

    wrap yarn around ruler 15 or so times (Note: you can do a different length, but I used s ruler) cut at one end and then tie a not at on of the new ends.

  2. Small 103515 2f2014 07 24 041502 tail%2b004

    braid from the not till you get about 3inches from the end. tie it off with string.

  3. Small 103515 2f2014 07 24 041715 tail%2b005

    take pet hair brush and brush out end of tail. start from the bottom and work your way up. lots of yarn bits will come out on the brush.

  4. Small 103515 2f2014 07 24 042145 tail%2b006

    take a 3inch by 3inch cardboard square and wrap yarn around it 20 to 30 times. tie I piece of string at the top (as tightly as possible). cut it at the bottom. NOTE: you will be making a BUTT-LOAD of these so be prepared O_O

  5. Small 103515 2f2014 07 24 042811 tail%2b007

    it will look like a tassel

  6. Small 103515 2f2014 07 24 042847 tail%2b008

    brush it out with the pet hair brush until its fluffy and looks like fur. leave the tow ends of the string alone

  7. Small 103515 2f2014 07 24 043012 tail%2b009

    after you make a few, start tie-ing them on. tie them about 1 cm apart on the braid. this is hard to explain, but as you go upward, tie it in a circular spiral 'thing' (side 1, side 2, side 3, side 4, repeat)

  8. Small 103515 2f2014 07 24 043857 tail%2b010

    continue all the way to the top

  9. Small 103515 2f2014 07 24 043931 tail%2b001

    when you get to the top, I took a needle and some string and sew up the top so it doesn't come apart

  10. Small 103515 2f2014 07 24 044058 tail%2b002

    sew on a loop at the top and your done