Skyline Tee

DIY Quick Gift

Posted by Jenna C.

About

Styling Tips:
1. Wear this Tee with distressed denim for the full effect!
2. Add some bling with the Metalicuff!

Share

You Will Need (2 things)

  • 1 Basic Crew T Shirt - Black
  • 2 yd 3 Row IRON ON Jumbo Studs

Steps (9 steps, 30 minutes)

  1. 1

    Plug in your iron and gather materials.

  2. 2

    Lay your tee on a flat surface that is a good place to iron and craft. Place stud trim on sleeve from shoulder point to edge and cut trim to fit.

  3. 3

    Repeat this procedure below initial strip of studs, until you've cut enough strips to fill the sleeve, leaving some at faried lengths. This will give your styline effect.

  4. 4

    Next, line up the trim on the shoulder seam and armhole seam vertically. Cut out (3) pieces as long as you wish. Ours are about 3 1/2".

  5. 5

    Lay a pressing cloth or a blank piece of paper over your strips and press with an iron for about 25-30 seconds. *Recommended: Turn your tee inside out and press from the back for an additional 30 seconds. Repeat this 2 times.

  6. 6

    Cut 4-5 strips of studded trim in varying lengths. These will be used for the bottom of the tee.

  7. 7

    Arrange strips at the right side of the tee shirt hem as pictured. Repeat ironing process.

  8. 8

    Let your tee cool completely (the studs get really hot!).

  9. 9

    Try it on and Enjoy!!!