https://www.cutoutandkeep.net/projects/simple-stenciling • Posted by Thunder Bay Press
Stenciling is a traditional decorative technique that perfectly complements a Craftsman-style room. And it’s perfectly easy to learn, too. If you can handle a paint- brush and a tape measure, you can quickly master the techniques for applying an attractive, simple border. And with a little practice, you can tackle complex patterns using multiple stencils and colors—and even create your own designs. The key tools are a special stenciling brush ($10; Photo 2) and the stencil and paint. A wide variety of each are available at craft and art supply stores. You can also find stencil patterns at book- stores or on the Internet, or even buy stencil blanks and cut your own with an X-Acto knife. The stencil shown here, a pattern called Ginkgo Frieze, is available from www.fairoak.com for $42. Match the brush size to the area being filled within the stencil. A 1/2-in., medium-size brush, shown here, is a good, all-purpose size. You can use almost any paint—artist acrylics, wall paints or the special stenciling paints sold at craft and art supply stores. Artist acrylic paint is shown here. Plan the layout Position your stencil on the wall at the desired height and mark the alignment holes or top edge. Then snap a light, horizontal chalk line around the room at that height. Make sure that whatever color chalk you use wipes off easily. Or use faint pencil marks, which can be easily removed or covered later. The key to a good layout is to avoid awkward pattern breaks at doors, windows and corners. To work out the best spacing, measure the stencil pattern and mark the actual repetitions on the wall. Vary the spacing slightly as needed to make the pattern fall in a pleasing way. Or if your stencil has multiple figures, you can alter the spacing between them. Start your layout at the most prominent part of the room and make compromises in less visible areas. Draw vertical lines at the pattern center points to make positioning easier. Dab on the paint Tape the stencil pattern on the alignment marks (Photo 1) and put a small quantity of paint on a paper plate. Push the stenciling brush into the paint just enough to coat the tips of the bristles, then pat off the excess on a dry cloth or newspaper, making sure the paint spreads to all the bristles (Photo 2). The brush should be almost dry—remember, it’s easier to add paint than it is to take it away. Lightly dab on the paint (Photo 3). Hold the stencil pattern with your free hand to keep it still and flat. Don’t worry about getting paint on the stencil, but avoid wiping or stabbing too
Stenciling is a traditional decorative technique that perfectly complements a Craftsman-style room. And it’s perfectly easy to learn, too. If you can handle a paint- brush and a tape measure, you can quickly master the techniques for applying an attractive, simple border. And with a little practice, you can tackle complex patterns using multiple stencils and colors—and even create your own designs. The key tools are a special stenciling brush ($10; Photo 2) and the stencil and paint. A wide variety of each are available at craft and art supply stores. You can also find stencil patterns at book- stores or on the Internet, or even buy stencil blanks and cut your own with an X-Acto knife. The stencil shown here, a pattern called Ginkgo Frieze, is available from www.fairoak.com for $42. Match the brush size to the area being filled within the stencil. A 1/2-in., medium-size brush, shown here, is a good, all-purpose size. You can use almost any paint—artist acrylics, wall paints or the special stenciling paints sold at craft and art supply stores. Artist acrylic paint is shown here. Plan the layout Position your stencil on the wall at the desired height and mark the alignment holes or top edge. Then snap a light, horizontal chalk line around the room at that height. Make sure that whatever color chalk you use wipes off easily. Or use faint pencil marks, which can be easily removed or covered later. The key to a good layout is to avoid awkward pattern breaks at doors, windows and corners. To work out the best spacing, measure the stencil pattern and mark the actual repetitions on the wall. Vary the spacing slightly as needed to make the pattern fall in a pleasing way. Or if your stencil has multiple figures, you can alter the spacing between them. Start your layout at the most prominent part of the room and make compromises in less visible areas. Draw vertical lines at the pattern center points to make positioning easier. Dab on the paint Tape the stencil pattern on the alignment marks (Photo 1) and put a small quantity of paint on a paper plate. Push the stenciling brush into the paint just enough to coat the tips of the bristles, then pat off the excess on a dry cloth or newspaper, making sure the paint spreads to all the bristles (Photo 2). The brush should be almost dry—remember, it’s easier to add paint than it is to take it away. Lightly dab on the paint (Photo 3). Hold the stencil pattern with your free hand to keep it still and flat. Don’t worry about getting paint on the stencil, but avoid wiping or stabbing too
Snap lines on the wall to align with the alignment marks on your stencil. Tape the stencil in place along the top edge with removable masking tape.
Dab the special stenciling brush into the paint, then pat off the bristles on a dry cloth. Leave the brush almost dry.
Apply the paint to the stencil with light dabbing and swirling motions until the stencil area is covered. Work in from the edges, brushing toward the center.
Lift the stencil up on the tape hinges and check for paint drips and for clear, sharp edges. Lay the stencil back down and touch up if necessary.
Allow the first color to dry, then tape the stencil up on the same marks and apply the second color. Cover nearby areas of the stencil to avoid getting paint in them.