Simple & Fast Atc Holder

To keep all your Ready-to-Swap ATC's organized!

https://www.cutoutandkeep.net/projects/simple-fast-atc-holder • Posted by Dragonfly

I started making ATC's, but i didn't have a good place to store them untill I can swap them. I had an empty teabag box and they fit in there so I made it look pretty. This is my first How-To so if you're missing something or whatever please let me know!

You will need

Scraps Of Paper Misc Embellishment(s) empty cardboard Teabox Glue Scissors

Project Budget

Time

Difficulty

Description

I started making ATC's, but i didn't have a good place to store them untill I can swap them. I had an empty teabag box and they fit in there so I made it look pretty. This is my first How-To so if you're missing something or whatever please let me know!

Instructions

1. 

   First, find a cardboard teabox where the ATC's will fit in. Some boxes are a little bit smaller than the width of the ATC.

2. 

   Cut off the lid and side flaps. So you will end up with a box with an open top.

3. 

   Now choose the paper you want to glue on each side of the box and glue it on there. This is the back and one of the sides.

4. 

   This is my front and the other side.

5. 

   If you want you can decorate the box in any way you like. I've kept it very simple.

6. 

   TaaDaa!! DONE!