Cut Out + Keep

Shoelace Studs

Make over your shoes without permanently altering it! Add some studs!

https://www.cutoutandkeep.net/projects/shoelace-studs • Posted by Jegs S.

Have you guys ever been bored with your shoe and don’t know what to do with it? Well, I have! I wanted my shoe to get pumped up a bit, so I made this VERY EASY shoelace studs! It will only take you 5 minutes to do. Very easy and simple!

You will need

Project Budget
Almost Nothing

Time

0 h 05

Difficulty

Pretty Easy
Medium 102134 2f2014 05 28 004406 043

Description

Have you guys ever been bored with your shoe and don’t know what to do with it? Well, I have! I wanted my shoe to get pumped up a bit, so I made this VERY EASY shoelace studs! It will only take you 5 minutes to do. Very easy and simple!

Instructions

  1. Small 102134 2f2014 05 28 003306 048 edited

    Gather your supplies. You will need some studs, clear vinyl or plastic, a ruler, scissors, double sided tape and a hot glue gun.

  2. Small 102134 2f2014 05 28 003615 050 edited

    Measure the width and length of the plastic that will hold your studs. Make sure that the width of it will be small enough for it to sit on your shoe. I just eyeballed mine.

  3. Small 102134 2f2014 05 28 003638 053 edited

    After doing so, Fold the two ends of the plastic like a letter. The center part is where the studs will go on.

  4. Small 102134 2f2014 05 28 003704 054 edited

    Apply glue on the center part of the plastic that you folded and put on the studs.

  5. Small 102134 2f2014 05 28 003712 061 edited

    Put a piece of double stick tape on the other end of the plastic.

  6. Fold the end with the double stick tape and overlap it with the other end. Repeat steps for the partner shoelace stud.